You are here: Home > Desoutter Indutrial Tools
Sort By:
Page of 4  
CP Desoutter ALPHA 5 (5-50 in. lbs.) Digital Torque and Angle Tester
phone order item please call for pricing and ordering

The ALPHA 1, 5 and 11 are designed for measuring and testing of torque controlled equipment such as wrenches, power tools or hand screwdrivers. These replace the TMP-220 torque testers. Accuracy ± 1% of reading from 20% to 100% of full scale.
CP Desoutter ALPHA 1 (1-10 in. lbs.) Digital Torque and Angle Tester
phone order item please call for pricing and ordering

The ALPHA 1, 5 and 11 are designed for measuring and testing of torque controlled equipment such as wrenches, power tools or hand screwdrivers. These replace the TMP-220 torque testers. Accuracy ± 1% of reading from 20% to 100% of full scale.
CP Desoutter DELTA5000 Torque and Angle Measuring Unit
phone order item please call for pricing and ordering

DELTA5000 is a torque & angle measuring unit with:

- All the features of the DELTA4000 plus the angle counting functions
- tightenings reports OK or NOK LED's
- up to 5000 readings in memory + 5 curves
- battery can operate up to 14 hours
- perform statistics calculation on ISO, NF and CNOMO standards
- connection to a PC via Deltapc software
- different operating modes: Peak, Track, Sequence (route)
CP Desoutter DELTA4000 Torque Measuring Unit
phone order item please call for pricing and ordering

DELTA4000 is a torque measuring unit with:
- tightenings reports OK or NOK LED's
- up to 5000 readings in memory + 5 curves
- battery can operate up to 14 hours
- perform statistics calculation on ISO, NF and CNOMO standards
- connection to a PC via Deltapc software
- different operating modes: Peak, Track, Sequence (route)
Desoutter NJ Series Screw Dispensers
Desoutter NJ Series Screw Dispensers
Our Price: please call for pricing and to order

• 3 Base models, NJ12, NJ23 and NJ45
• Modular rail system to permit screws of 1.4 to 5.0mm diameter to be fed
• Rail can be changed and the unit set up within 5 minutes
• Simple brush and rail combination to prevent jamming
• 30% faster feed rate due to a number of screws being fed into
the rail in a single cycle
• Dispenser has built in height adjustment to allow the screw to be
presented to the operator at the correct angle
CP0610 TELUL #5 Spline Torque Controlled Impact Tool
CP0610 TELUL #5 Spline Torque Controlled Impact Tool
List Price please call for discounted pricing

- shuts off automatically when the specified torque is reached
- The torque control mechanism and speed adjustments are made by two screwd located in the rear of the housing cap
- max torque 600 ft.lb.
- working torque: 300 ft. lb.
- air consumtion 59 cfm
- integral socket retainer
- 3-Jaw clutch
- D Outside handle
- vibration level 6.4 (m/s)^2
- noise level 93 dB(A)
- length: 15.4 inches
- weight: 23 lbs.
- air inlet size: 1/2" NPT
- ordering part no. T018044
- A CP Tools Chicago Pneumatic
quality torque tool
CP Desoutter ALPHA 11 (10-100 in. lbs.) Digital Torque and Angle Tester
phone order item please call for pricing and ordering

The ALPHA 1, 5 and 11 are designed for measuring and testing of torque controlled equipment such as wrenches, power tools or hand screwdrivers. These replace the TMP-220 torque testers. Accuracy ± 1% of reading from 20% to 100% of full scale.
CP 0610 TELUD 1
CP 0610 TELUD 1" Torque Controlled Impact Tool
List Price please call for discounted pricing

- shuts off automatically when the specified torque is reached
- The torque control mechanism and speed adjustments are made by two screwd located in the rear of the housing cap
- max torque 600 ft.lb.
- working torque: 300 ft. lb.
- air consumtion 59 cfm
- hole retainer
- 3-Jaw clutch
- D Outside handle
- vibration level 6.4 (m/s)^2
- noise level 93 dB(A)
- length: 15.4 inches
- weight: 23 lbs.
- air inlet size: 1/2" NPT
- ordering part no. T018056
- A CP Tools Chicago Pneumatic quality torque tool
Please call us at 1-800-353-4676 for more information or to order this item.